Sub 10 active subwoofer 10" 400 Watt

SUB 10 is a professional subwoofer, designed to give the sound engineer the best possible control over the low end of audio spectrum, complementing any near or midfield monitoring system.

Despite its unassuming size, it offers precise reproduction of low frequencies. By using an exceptional woofer designed by the best engineers, coupled with a high-end class D amplifier and our know-how, we managed to create a subwoofer which meets the highest sonic requirements.

SUB 10 is designed for operation in stereophonic or multi-channel systems (5+1 or 7+1 and larger) such as DOLBY, DTS, THX, etc. This subwoofer is suitable for small/mid-sized: recording studios, broadcasting studios, TV studios, multimedia studios, post production facilities, mastering, digital workstations, home recording studios, audio monitoring systems of the highest quality.

 
Picture / Bilder Beschreibung Price in CHF incl. 8.1% VAT

SUB 10"

  • Standard version black. (Photo = White with extra charge)
  • Aktiver Subwoofer mit 10" Chassis . 108dB/SPL /116dB peak/pair
  • 400 Watt power amplifier built-in
  • 19Hz-90 Hz
  • HxBxT  39 x 39 x 40 cm, 24 Kg
  • Voltage selector switches 110/220V
  • XLR Balanced Stereo Input (Female) Combo with TSR
  • 2x RCA/asymmetrisch Inputs
  • 2x Loop through Output XLR M

SUB 10 is a professional active studio subwoofer, designed for accurate sound realization.

SUB 10 is a professional active studio subwoofer equipped with sub-bass loudspeaker driver of 29 cm in diameter, class D power amplifier 400W at 4Ohm mounted on the rear panel, there are also calibrated controls, protections, indicators, and the input/output terminals.

SUB 10 is designed for operation in stereophonic or multi-channel systems (5+1 or 7+1 and larger) such as DOLBY, DTS, THX, etc.

This subwoofer is suitable for small/mid-sized:

  • recording studios,
  • broadcasting studios,
  • TV studios,
  • multimedia studios,
  • post production facilities,
  • mastering,
  • digital workstations,
  • home recording studios,
  • audio monitoring systems of the highest quality.

Technical specifications

Subwoofer

Type Active – Class D power amplifier Hypex: 400 W @ 4Ω
Dimensions Height x Width x Depth
39 cm x 39 cm x 40 cm / 15.35" x 15.35" x 15.75"
Free Field Frequency Response ±2.5 dB: 19-90 Hz
SPL in Free Field @ 1m RMS: 108 dB (single subwoofer)
Peak: 116 dB (pair of subwoofers)
Weight 24 kg / 53 lbs

Calibrated Controls

Input Sensitivity Switch / VOLUME (8 positions) -4.5dB, -3dB, -1.5dB, 0dB, 1.5dB, 3dB, 4.5dB, 6dB
Input Sensitivity Switch / VOLUME (3 positions) -20dB, -10dB, 0dB
Low-pass filter Switch CUT OFF 40Hz, 45Hz, 50Hz, 57Hz, 63Hz, 71Hz, 80Hz, 90Hz
Filters By-Pass Switch UNFILTERED (LFE) Position down: filters ON
Position up: filters OFF
PHASE Switch 0 degrees, 180 degrees
STAND-BY Switch Position down: active STAND-BY
Position up: continuous mode (Stand-by OFF)

Loudspeaker

Subbass Loudspeaker Ø 29 cm
Diaphragm: cellulose, surround: rubber

Amplifiers

Subbass Loudspeaker Power Amplifier 400 W RMS @ 4 Ω (270 W RMS @ 6 Ω)
THD distortions Typ 0.01%, Max 0.05% 20Hz<f<20kHz, Pout < PR/2
Max 0.04% 20Hz<f<20kHz, Pout = 1W

Inputs, Outputs

INPUT right (R) and left (L) Two types (common socket Combo):
- XLR symmetrical (balanced)
- TRS symmetrical (balanced) "6.3 mm"
and RCA nonsymmetrical
Input impedance 10 kΩ
„Loop Through” Output XLR symmetrical, Output impedance 100 Ω

Protections

Subbass Loudspeaker Protection Pop-free start and stop control
Power Amplifiers Protections Overcurrent protection
Power Amplifiers Protections Overvoltage protection
 

 

 Standardversion
:
black wood veneer
per piece: SFr. 1'444.75
Special versions
on demand/cosum made:
Hi-End Piano black
ask for Quote
Hi-Gloss color
or special wood veneer (individualcostum made)
ask for Quote
ask for a quotation and delay
 
 
 


 


 
 

 

QR-Code