MC-12B
MC-12B HD EQ |
||
|
|
|
Audio Inputs and Outputs | |
Analog Audio Inputs |
Eight stereo pairs (RCA) or five stereo pairs and one 5.1-channel analog input |
Digital Audio Inputs |
Six S/P-DIF coaxial (RCA), six S/P-DIF optical (including one optical mini jack), one AES/EBU (XLR); coaxial and optical inputs conform to IEC-958, S/P-DIF standards |
Main Audio Outputs |
Twelve unbalanced (RCA) and twelve balanced (XLR, MC-12HD Balanced only) connectors for Front L/R, Center, LFE, Subwoofer L/R, Side L/R, Rear L/R, Auxiliary L/R |
Zone 2 Audio Outputs |
2 unbalanced (RCA, 1 fixed and 1 variable output level) stereo connectors and 1 balanced stereo connector (XLR, variable output level, MC-12HD Balanced only) |
Record Audio Outputs |
2 unbalanced (RCA, 1 fixed and 1 variable output level) stereo connectors, 1 S/P-DIF coaxial (RCA) and 1 S/P-DIF optical connector (in parallel) |
Sample Rates |
44.1, 48, 88.2, 96kHz |
Accepts |
16-24 bits PCM audio, Dolby Digital, Dolby Digital EX, DTS and DTS-ES discrete data formats |
Performance (Main Zone) | |
Analog-to-Digital Conversion |
24-bit, 96kHz, dual-bit architecture |
Digital-to-Analog Conversion |
24-bit, 44.1 to 192kHz, multi-bit architecture, Conversion operating in dual-mono mode |
Frequency Response |
10Hz to 20kHz, +0.1dB/-0.25dB, -0.75dB at 40kHz, reference 1kHz |
THD + Noise |
Below 0.003% at 1kHz, maximum output level |
Dynamic Range |
108dB minimum, 111dB typical, 22kHz bandwidth |
Signal-to-Noise Ratio |
108dB minimum, 111dB typical, 22kHz bandwidth |
Input Sensitivity |
200mVrms (2Vrms for maximum output level) at 0dB input gain |
Input Impedance |
100k in parallel with 150pF |
Output Level |
150mVrms typical, 6Vrms maximum (RCA connectors) 300mVrms typical, 12Vrms maximum (XLR connectors, MC-12HD Balanced only) Maximum value with full-scale input signal and volume at +12dB |
Output Impedance |
100 in parallel with 150pF (RCA outputs); 50 in parallel with 150pF (XLR outputs, MC-12 Balanced only) |
Performance (Zone 2 and Record Zone) | |
Analog-to-Digital Conversion |
24-bit, 44.1 to 96kHz, dual-bit architecture (Record Zone only) |
Digital-to-Analog Conversion |
24-bit, 44.1 to 192kHz, multi-bit architecture |
Frequency Response |
10Hz to 20kHz, +0.1dB/-0.25dB,-0.75dB at 40kHz, reference 1kHz THD + Noise Below 0.005% at 1kHz, maximum output level |
Dynamic Range |
105dB minimum, 108dB typical, 22kHz bandwidth |
Signal-to-Noise Ratio |
105dB minimum, 108dB typical, 22kHz bandwidth |
Input Sensitivity |
200mVrms (4Vrms for maximum output level) |
Input Impedance |
100k in parallel with 150pF |
Output Level |
200mVrms typical, 4Vrms maximum (RCA connectors) 400mVrms typical, 8Vrms maximum (XLR connectors, Zone 2 only, MC-12HD Balanced only) Maximum value with full-scale input signal and volume at 0dB |
Output Impedance |
100 in parallel with 150pF (RCA outputs); 50 in parallel with 150pF (XLR outputs, Zone 2 only, MC-12 HD Balanced only) |
Video Inputs and Outputs | |
Video Inputs |
Two composite (RCA), three S-video, and four component video (three RCA, one BNC) |
Video Outputs |
Four composite (RCA, two monitor and two record), four S-video (two monitor and two record), and one component (BNC) |
Performance (Composite & S-video) | |
Switching |
Active |
Output Level |
1.0V peak-to-peak |
Impedance |
75 |
Input Return Loss |
<40dB |
Differential Gain |
<0.3% |
Differential Phase |
<0.3° |
Bandwidth |
>25MHz |
K Factor |
<0.3% |
Gain |
±0.15dB |
Signal-to-Noise Ratio |
>70dB |
Frequency Response |
10Hz to 10MHz + 0.1/-0.3dB |
Compatibility |
NTSC, PAL, and SECAM |
Performance (Component Video) | |
Switching |
Passive |
Impedance |
75 |
Bandwidth |
>300MHz |
Insertion Loss |
<3dB |
Compatibility |
3-channel (Y, Pr, Pb), format-independent |
Other | |
Microphone Inputs |
Four 3.5mm miniature phone jacks |
Microphone Input Sensitivity |
10mVrms (400mV maximum input level) |
Microphone Input Impedance |
20k (accepts balanced or unbalanced input signals) |
Trigger Outputs |
One power on/off trigger, two programmable triggers; +12 VDC, 0.5 amps each |
RS-232 Serial Input/Output |
Two 9-pin D-sub connectors |
Power Requirements |
90-250 VAC, 50-60Hz, 90W (universal line input), detachable power cord |
Remote Control |
Hand-held, backlit infrared remote control unit |
Environment | |
Operating Temperature |
0° to 35°C (32° to 95°F) |
Storage Temperature |
-30° to 75°C (-22° to 167°F) |
Relative Humidity |
95% maximum without condensation |
Batteries |
Requires 2 AA batteries (Alkaline batteries recommended) Requires 2 AA batteries (Alkaline batteries recommended) |
Dimensions and Weight | |
Width |
17.3" (440mm) |
Depth |
14.85" (377mm) |
Rack Mounting |
Optional brackets are available for installation in a standard 19" equipment rack (three rack units required for MC12HD; four rack units required for MC-12HD Balanced.) |
Height (MC-12) With Feet |
5.65" (144mm) (three rack units without feet) |
Height (MC-12B) With Feet |
6.73" (171mm) (~four rack units without feet) |
Weight (MC-12) |
36lbs (16.4kg) |
Weight (MC-12B) |
45lbs (20.5kg) |
HDMI Inputs and Outputs | |
HDMI Inputs |
6 HDMI Type A (19-pin) connectors |
HDMI Outputs |
1 HDMI Type A (19-pin) connector |
HDMI Performance | |
Video Resolutions |
480i, 480p, 576i, 576p, 720p, 1080i and 1080p (resolutions dependent on the capability of the HDMI display connected to the MC-12HD HDMI output connector) |
Audio Sample Rates |
44.1kHz, 48kHz, 88.2kHz, 96kHz |
Accepts |
Hi-resolution Multi-Channel Audio (Lossless HD Audio) |